Clean pool stone: what treatment to use

clean pool stone

Table of contents of the page

En Ok Pool Reform within the section of clean pool we present you an article about: How to clean the stone in the pool?

On the other hand, we also suggest you visit our page dedicated to pool floors.

Cleaning considerations for pool floors

Importance of cleaning the pool floor

The floor of any pool is where the greatest number of impurities tend to be deposited., so this is where you should insist more firmly with the methods you decide on.

For this reason, we must have a learned routine on how to clean the pool floor.

However, to combat undesirable occurrences in the floors around the pool, we must acquire correct cleaning routines.

Well, by following certain habits you will be preventing dirt and debris from sticking to the floor,

And, certain microorganisms and bacteria appear at the edge of the pool that cause water contamination, and in many cases multiple health problems for bathers.

Why is it important to clean the pool floor well?

As a reminder, pool edges and pool floors are exposed to multiple factors when exposed to the elements:

As far as the hygiene part is concerned, we have inclement weather such as rain and wind, which drag us and cause us to accumulate dirt and mucus.
Another reason is the ultraviolet rays of the Sun, which cause the material to dry out.
No less important, when using the pool we cause chlorine, lime, and chlorine to accumulate on the pool edge stone...
On the other hand, we must maintain the grade 3 anti-slip properties that the pool floor must have, otherwise we will find that when the floor is wet it can slip over time. In this way, the question of why the pool floor slips is also answered.

How to clean stone pool edge pool

swimming pool edge renovation

Routinely check the cleanliness of the stones

First of all, to keep the porous stone clean and in perfect condition, it is best that you check it periodically.
And, if after having cleaned the stone with natural products, you notice that it is still dirty, in this case you will need to use a special cleaning product, such as a descaler, that is suitable for this surface. And be sure to follow all the usage recommendations indicated by the manufacturer.

1st procedure to clean pool stone

Preserve and protect your stone pool surround

Apply a sealant to the pool stones

Apply a water-based sealer formulated for use on natural stone, to protect your stone pool surround from stains and dirt.
Choose a breathable sealant that can help minimize shifting and freeze-thaw cracking, and is salt resistant.
Before grouting, add a grout sealer to the grooves between the stones to prevent mold and mildew development.

1st procedure to clean pool stone

Clean stone pool surround

Frequently sweep the edge of the pool

Secondly, you have to sweep the stones in the pool frequently to prevent mold from forming.
Next, you must clean them with a neutral pH product.
In stained areas you will need an acidic cleaner, adhering closely to the manufacturer's instructions so as not to cause whitening of the stones themselves.
Additionally, once a month it is recommended to use a pressure washer to achieve better results.

2nd procedure to clean pool stone

Maintain Your Stone Pool Surround

Plug the joints of the pool stones

Be sure to caulk any expansion joints created between the coping and the pool deck; This way the stones will be able to expand and contract while preventing pool water from freezing at the joint and breaking the pool stones.

3st procedure to clean pool stone

Check the mortar between stones

Take care of the pool edge mortar

On the other hand, you must be careful at each beginning of the season to check the mortar that exists between the stones to see if there are cracks or crumbling.
If there are small cracks, fill them with a waterproof sealant that matches the color of the stones.
On the other hand, if you see larger cracks or general loss of mortar at a joint, try to find out the reason for this problem before repairing, or it will continue to occur; But beforehand you may find yourself in the situation of having to replace the mortar, the stones or both.

4th procedure to clean pool stone

How to repair pool stone

Pool stone repair procedure

Pool stone repair

5th procedure to clean pool stone

How to restore pool coping stone

First, you have a stone color enhancer, which highlights the natural tones of the stone and includes a stain protector and sealer.
However, you can also consider the option of using a stone polisher, in the event that the pool cap was purchased with a high-gloss finish; as this will remove watermarks and stains, and restore its original shine.

6th procedure to clean pool stone

How to replace the stone on the edge of the pool

How you should replace the stone at the edge of the pool

Especially, in those cases where we must replace crown stones, we must remove them very carefully and with the help of a hammer and a chisel.
Second, we will clean the mortar bed and remove the mud from the pool beam.
Subsequently, we will fill the stone bed again with a mortar and carefully place the new stones in the pool, ensuring that it is level with the other stones.

How to change the pool coping stone

Change of crowning stone and pool border

7th procedure to clean pool stone

When to renew pool stones

Occasion to consider renewing the pool stone

The stone pool cap can be renewed if it begins to look dull after a few years.

How to keep natural pool stone clean

Keep natural stone around your pool

Keeping your natural stone paving clean is as important as cleaning the water in your pool. Here are some steps to keep in mind when maintaining natural stone around your pool that will ensure longevity.

Process to Maintain Natural Stone Around Your Pool

1st Process to Maintain the natural stone around your pool: sealing

We always recommend sealing your stone after installation.
Although, in certain environments, it may be appropriate to dip the seal (on all six sides of the stone tile) with a consolidating sealer.
This would be highly recommended for facing the pool.
Despite this, to best protect the stone, it is also recommended that it be resealed every 2-3 years to mitigate water ingress into the stone.

2nd Process to Maintain the natural stone around your pool: sealing: Water level management

It is recommended to keep the pool water level about 10 cm below the edge of the pool to avoid constant immersion or constant saturation and drying.

3rd Process to Maintain the Natural Stone Around Your Pool: Sealing: Debris Removal

If your pool is located under any type of foliage that could stain the stone, make sure it is cleaned and removed before it has a chance to do so.
A quick sweep every couple of days will do the trick along with a gentle hose.

4th Process to Maintain the natural stone around your pool: sealing: Neutral pH cleaner

Use a pH neutral cleaner for regular stone cleaning and maintenance. Avoid using strong acids or alkaline products to clean, as these will reduce the effectiveness of the sealer and may damage the stone.

Table of contents of the page: Clean pool stone

Methods for cleaning porous pool stone

How to clean porous pool stone

La Cleaning the porous stone of the pool is one of the essential tasks when carrying out its maintenance. Typically, porous stone is used to crown the pool, that is, for the curb.

Therefore, it is a delicate area and very prone to accumulating dirt, and if neglected it can end up damaging the appearance of the environment. Therefore, to help you with the maintenance of your pool, we want to offer you a series of recommendations and tricks, so that you can address the cleaning the porous stone of your pool without complications.

Measures for cleaning porous pool stone

Porous stone surfaces tend to collect and accumulate a lot of dirt, especially during the humid months. In fact, mold is one of the triggers if it is not cleaned in time.

1st recommendation for cleaning porous pool stone

Avoid the use of abrasive products

Must be avoid cleaning the porous stone of the pool with chemical products if you don't know its composition.

If these elements are very alkaline or abrasive, they can detach the upper faces of the stone, take away its shine, or even damage it to such an extent that it is uncomfortable to step on or sit on.
You should avoid products like ammonia and bleach, as both can give a faded and worn look to porous pool stone.
In any case, it is most advisable that, prior to cleaning, you do a test on a small area to check the effects that the product has on the stone.

2nd recommendation for cleaning the porous stone of the pool

Rub in circles

brush pool stone

If a brush is used to clean the porous stone of the pool, it is advisable that this do not have abrasive bristles,

And, it is more appropriate apply circular movements, in order to avoid tearing the material and damaging it.

3nd recommendation for cleaning the porous stone of the pool

Use mild soap

The best choice of cleaning product for this task is a mild soap.

For example, you can use a little natural detergent or the soap you use for the dishwasher, since they do not harm the appearance of this type of surface.

4nd recommendation for cleaning the porous stone of the pool

Use pressurized water

A great option, to successfully clean the pool stone, is make use of a hydrolavadora

The pressure washer uses pressurized water to remove dirt from the most complicated areas, as is the case with this material.
Of course, caution in do not bring the nozzle too close to the surface of the stone.

Home Cleaning of Porous Pool Stone

How to clean porous pool stone with homemade tricks?

Truly, it is not essential to use very particular products to clean the porous stone of the pool; as long as the dirt is very embedded or there are stains that are difficult to remove.

So, for most cases, you can clean pool stones with items that you probably already have at home.

1st way of home cleaning of the porous stone of the pool

Hot water

Water is usually very effective in removing dirt and stains from porous pool stone.

Water is even more effective in cleaning pool stones if you use a pressure washer that releases hot water under pressure.

2nd way of homemade cleaning of the porous stone of the pool

Peroxide

Hydrogen peroxide is very useful, since reacts on dirt and softens it.

How to apply hydrogen peroxide to clean pool stone

To apply it, mix half a bucket of water with a bottle of hydrogen peroxide (300cc).
Next, with the solution obtained, the stones will be scrubbed with a soft cedar brush.

3st way of home cleaning of the porous stone of the pool

Chlorine

different types of pool chlorine

Cleaning the pool stone with chlorine is very effective but it requires a careful process.

You must make sure mix it with water to balance it, test its effect on a small surface, and if you see no negative effects, you can clean the porous stone of the pool by scrubbing the surface, let the chlorine act for a few minutes, and rinse with water.

4nd way of homemade cleaning of the porous stone of the pool

Clean pool stone with salfuman

Clean stone around pool

Salfuman Descaler for swimming pools price

[amazon box=»B07G6TMLPS» button_text=»Buy»]

Products to clean the pool floor

How to clean the floors around swimming pools

Below you will find the solution to how to clean pool stone.

So, to be able to thoroughly clean the edges of modern pools from chips, mold and dirt There are different specific products for swimming pools.

Professional crowning stone cleaner

Product description for cleaning crown stones

Features crown stone cleaner

Recovers the original appearance, Designed for deep cleaning and descaling of stones of all types, such as coping stones in swimming pools, artificial stone, tiles or stoneware, ideal cleaner for pools before painting or filling.
It can be diluted. Thanks to its high concentration, it can be used pure or diluted up to 1:10 in water, depending on the existing dirt. It contains a compound that prevents the development of fungi, bacteria and molds.

How to use the product to clean crown stones

Professional product, gloves should be used during application and protect the skin and eyes.
Apply the product on the support and leave it to act for 3 – 8 minutes.
Apply by spraying, scrubbing or dipping and spread with a mop.
Rinse afterwards with plenty of pressurized water if outdoors.

Product precautions for cleaning pool edges

In full pools, avoid letting the product fall into the water.
Avoid letting the product come into contact with surfaces made of marble, granite, glass, metal alloys or metals with electrolytic treatments.

Buy product for pool edge stone

Price of product to clean pool edge stone

[amazon box=»B08X3M53NP, B003AU9UC6″ button_text=»Buy»]

Preserve non-slip pool floor property

Why is the pool floor slippery?

The answer is so obvious because it gradually loses its properties and like everything requires maintenance, treatment, perseverance...

In the pool market there are products that help preserve the properties and contribute to the conservation of the properties of the non-slip floor for swimming pools, although you must take into consideration that some of them as side effects will cause the floor to look brighter.

Pool edge renovation painting or coping stone

painting renovation crowning stone

Paint to clean pool stone

About paint to clean pool stone

Piscians or coping stone edging renovation paint is: non-slip – anti-algae and easy to apply

EDGE RENOVATOR, ideal product to apply to the crowning stone of swimming pools, available in white and sand white (similar to the original of this type of stone)


EDGE RENOVATOR, ideal product to apply to the crowning stone of swimming pools, available in white and sand white (similar to the original of this type of stone)	ANTI-SLIP, the product is developed with anti-slip properties, even when with wet floors	EASY TO APPLY with a roller or brush. GREAT RESISTANCE, great adhesion to the support and chemical and mechanical resistance	GOOD PERFORMANCE, for better adhesion of the product it is recommended to dilute the first coat in 20 – 30% of water and apply the second pure