Table of contents of the page
En Ok Pool Reform from this page within Pool filtration We want to tell you everything about: ESPA pool pump: variable speed for good water recirculation and filtration.
What type of pool pumps exist?
Pool motor models
Single speed pool pumps
- Single speed pool pumps do more or less one thing, they pump your pool water through your system at a single constant speed.
- The thing about single speed pool pumps is that the initial price is very attractive because they are quite affordable.
- However, they are quite expensive to operate.
- Now the only job they do, they do well, which is turning the water and providing a flow that allows your equipment to function properly.
Two speed pool pumps
- Two-speed pumps operate at two fixed speeds, high and low, and require a separate device, such as an automation system, to adjust between the two speeds.
- Since you can adjust between the two speeds, your energy use will decrease as long as you are running at the lowest speed.
- Switching from your single-speed pump to a two-speed pump can save you up to 80% on your pool energy bill.
Variable speed pool pumps
- All the pumps de variable speed They are equipped with a permanent magnet motor and can operate in a wide variety of speeds in order to adapt to the specific needs of your Swimmingpool.
Difference between centrifugal pool pumps
What is the difference in work between single stage centrifugal pumps and multistage centrifugal pumps?
The greater the number of stages a pump has, the greater the discharge pressure at the outlet.
Multistage centrifugal pumps are designed to create a higher pressure in each stage. However, the flow remains constant at all stages.
Each stage of a centrifugal pump has: rotor, diffuser, and directional return blades.
These three components are housed within a single housing unit. The head generated by a single stage centrifugal pump depends on the circumferential speed and the type of impeller used. The biggest drawback of centrifugal pumps is that the rotation speed cannot be altered.
As a result, this could become operationally inefficient in certain applications.
However, if the number of stages can be increased, this operational inefficiency can be overcome. This is where multistage centrifugal pumps come into play.
What are multistage centrifugal pumps?
- In a multistage pump, the transferred liquid flows through two or more impellers that are connected in a series.
- These pumps have several fluid chambers that are connected in series.
- The fluid enters the first chamber.
- At this stage, the fluid pressure is the same as the pressure in the suction line.
- Once the liquid leaves the first chamber, the pressure increases even more.
- This keeps repeating until the liquid reaches the last chamber.
What company is ESPA?
What is the ESPA pool pump brand company?
ESPA is a company specialized in the design, production, distribution and innovation of pumps, systems and water management equipment for the domestic and residential sector.
The Espa pump brand is one of the most recognized among pool pump manufacturers.
Since 1962, ESPA has been internationally recognized for constant innovation, service, product quality and proximity in the companies which make difficult the relation with the clients.
Their more than 50 years of history had offered us, dedicated to the production of water pumps and other pumping and filtration equipment for swimming pools, has allowed the brand to create top quality pumps, efficiency and reliability. ESPA self-priming single-stage centrifugal pumps are very compact, completely silent and designed specifically for water recirculation in water systems. domestic or collective swimming pools.
For us, the continuous improvement of domestic water pumping solutions is a fundamental value. For this reason we have a value chain based on our human capital, corporate social responsibility and customer satisfaction, in addition to a strategic definition based on product development and innovation and the constant incorporation of new series to respond to present and future challenges and needs.
At ESPA, innovation and research are essential to achieve the level of excellence imposed by the market, and to offer innovative products that respond to the needs of today's customers who demand technological, efficient equipment that guarantees sustainable treatment of energy resources.
What are ESPA variable speed pumps and their advantages
ESPA pool pump what is it
Variable speed pumps are born with a new concept of pump for pools since they are the most efficient solution in terms of the energy cost of the pool.
The ESPA SilenPlus Pump is the pool pump that incorporates the frequency converter with an important innovation in its operation to adapt it to the operation of the pool: The variation of speeds in the work cycles.
Silen Plus: swimming pool, well-being and savings
ESPA Silen Plus is the pool pump that incorporates the frequency converter with an important innovation in its operation to adapt the set to the pool application: the variation of speeds in the work cycles.
What advantages does the SilenPlus variable speed pump have?
Benefits of Efficiency + savings = ESPA Silen Plus pool pumps perfectly comply with the efficiency formula thanks to the optimization of filtering and backwashing.
EVOPOOL® means progress, and as such, from now on it will encompass all the improvements and innovations that ESPA develops and introduces in its products and applications to swimming pools.
Definitely, the otor espa pool motor contributed to the optimization of the filtering cycle.
- Efficiency + electrical savings = efficiency System that optimizes filtering to increase efficiency, with the consequent saving of electrical energy, while adding a cycle that increases the effectiveness of cleaning the pool surface.
Pros of espa pool motor
- The Silen Plus pump incorporates a wireless control system to automate the operation of the installation, achieving maximum ease and efficiency of operation, therefore allowing the operation of the pump to be adjusted according to the needs of the installation and the user themselves. By raising or lowering the speed of the motor, we are not only modifying the speed and flow of water, but also the energy consumption.
- Greater energy, hydraulic and economic savings Energy costs will really be reduced if you install a variable speed pump and you will also achieve better filtration quality since by decreasing the speed of the pump the pool water passes through the filter tank (of sand, glass...) more slowly and thus achieves better filtration quality.
- Ultra-quiet operation (45 dB)
- Longer shelf life
- Pool Filtration System Automation
- Simplicity of installation and use thanks to the Evopool App
- Filter dirt control
- 5 years warranty
Save with the SILENPLUS variable speed pump
SAVINGS: up to 58% water savings compared to standard pumps.
- EFFICIENCY: work cycles specifically developed for application in swimming pools achieve maximum efficiency. SAVINGS: up to 84% savings in electrical energy compared to standard pumps, with the consequent economic savings. Optimization of the backwash cycle: effectiveness + water savings = efficiency Backwash system that, thanks to a specifically developed cycle, manages to increase the effectiveness of the process while shortening cleaning time, drastically reducing the amount of water consumed and achieving a effective washing. EFFICIENCY: reduction in backwash time and increase in filter cleaning efficiency.
Table with energy and economic savings data of ESPA variable pumps
espa purifier engine what is it
What are ESPA Silen Plus pool pumps?
What ESPA pool pump do I need?
Reasons to purchase an ESPA pool motor
For its high technology, for its silent motor or for its continuous operation... These are just some of the reasons why you have to buy an Espa pump!
And they are so functional that having a pump from this brand will only give you benefits. And not only do we, a team with more than 30 years of experience, believe this, but those who have purchased their Espa pump are very clear about the advantages they offer. And its continuous recirculation and the result of crystal clear water position Espa pumps as one of the most prestigious in the sector.
If you want to take baths without any residue bothering you... At Momentos Piscina you can buy the most popular Espa models online and also have the support of an experienced team that will help you choose the best one.
Types of pool spa pump
Espa Silen 75 single-phase or three-phase pump
One of the espa bombs The most notable are the Silen 75. This category of pumps are designed with features that make the difference between other models such as the built-in thermal protector, the purge plug, the prefilter with transparent cover and the anti-blocking closure.
They are designed for both water recirculation in domestic and residential pools.
The bombs Espa Silen 75 You can find them in their single-phase or three-phase version.
For single-phase pumps, you can purchase different models such as ESPA Silen S 75 Single-Phase Pump, ESPA Silen S2 75 Single-Phase Pump, and Jardino Pool NOX 75 M. For three-phase pumps, models such as the Espa Silen S 75 Three-Phase Pump or the Espa Silen S2 75 Three-Phase Pump.
Espa Silen 100 single-phase or three-phase pump
This model is designed for water recirculation in domestic or residential pools. Thanks to their adaptability, they are able to reduce the noise of your engine.
At Momento Piscina you will find both varieties, the Espa Silen 100 single-phase and three-phase. Both have a prefilter capable of providing incredible energy efficiency.
You can also find a model fully compatible with the Espa Silen 100 M, the Jardino Pool NOX 100 M
If you want a single-phase one, you can purchase models such as Silen I 100, about which we will provide more information later.
If, on the other hand, you want a three-phase pump, you can find the Silen S 100 and the Silen S2 100.
Espa Silen I 100 Single Phase Pump
Indicated for medium and small size pools, the Espa Silen I 100 Single-Phase model is perfect since it is designed with a power capable of satisfying the dimensions of these pools.
But be careful, it is also indicated for removable canvas or plastic pools or a spa-type bathtub. In addition, this pump is compatible with water with saline treatment.
Those who acquire it, stand out its silent motor and its ability to filter water continuously. With this bomb, taking a dip will be a pleasure!
Silen Plus Pump 1 CV
For those who want to save electricity consumption, this is your water pump! The Silen Plus 1 CV Pump It is capable of saving electricity, up to 84%, and saving water, up to 58%. Yes, we are not exaggerating, this pump is completely capable of being highly efficient and spending much less than other equipment. A real marvel!
It is one of the most advanced pumps in the world. Silen range and includes the control system function, capable of detecting the position of the selector valve and activating or deactivating the operating cycle. In addition, it stands out for its practicality, since it is useful for filtering pool water, spas, fountains, jets and ponds.
And if you want to manage your pump from your mobile phone, this model includes an application with which you can program your pump, calculate energy consumption or manage its parameters.
Savings and MODEL calculator if you buy an ESPA variable speed pool pump
Next, we provide you with the link so that you can check the savings calculation that you would make when choosing an ESPA pool pump according to your specific case, that is, you will find the following table:
Below link for eSavings calculation if you buy an ESPA variable speed pool pump .
How to calculate espa pool filtration equipment?
Choosing the right espa pool pump
Later, in this session we talk about how to select the pump and filter that best suits the different types of pools.
Models and Features ESPA pool pumps
ESPA pool motor types
SILENPLUS FEATURES | SILEN I CHARACTERISTICS | SILEN S FEATURES | SILEN S2 FEATURES |
---|---|---|---|
SILENPLUS pool pump type | SILEN I pool pump type | SILEN S pool pump type | Pool pump type SILEN S2 |
Single-stage centrifugal pump with variable speed for water recirculation and filtration. | Single-stage centrifugal pump for water recirculation and filtration. | Single-stage centrifugal pump for water recirculation and filtration. Water recirculation and filtration for medium-sized residential pools. Silent. Self-priming up to 4m. | Single-stage centrifugal pump for water recirculation and filtration. |
Which pool is it suitable for? Silence Plus | Which pool is it suitable for? Silence I | Which pool is SILEN S suitable for? | Which pool is SILEN S2 suitable for? |
Water recirculation and filtration for small, medium and large residential pools. Silent. Self-priming up to 4m. | Water recirculation and filtration for small residential pools. Silent. Self-priming up to 4m. | Water recirculation and filtration for medium-sized residential pools. Silent. Self-priming up to 4m. | Water recirculation and filtration for large residential pools. Silent. Self-priming up to 4m |
Silen Plus electrical characteristics | SILEN I electrical characteristics | SILEN S electrical characteristics | SILEN S2 electrical characteristics |
Electrical isolation: Class f Service factor: S1 Protection degree: IPX5 Rearmament: Automatic Type of motor: Asynchronous | Electrical isolation: Class f Service factor: S1 Protection degree: IPX5 Rearmament: Automatic Type of motor: Asynchronous | Electrical isolation: Class f Service factor: S1 Protection degree: IPX5 Rearmament: Automatic Type of motor: Asynchronous | Electrical isolation: Class f Service factor: S1 Protection degree: IPX5 Rearmament: Automatic Type of motor: Asynchronous |
Silen Plus Materials | SILEN I Materials | SILEN S Materials | SILEN S2 Materials |
Materials Engine casing: Aluminum Mechanical seal: Alumina-Graphite Suction body: Technopolymer Surrounding body: Technopolymer Drive body: Technopolymer Diffuser/s: Technopolymer Pump shaft: AISI 431 Driver/s: Technopolymer Boards: NBR/EPDM Prefilter: Technopolymer | Materials Engine casing: Aluminum Mechanical seal: Alumina-Graphite Suction body: Technopolymer Surrounding body: Technopolymer Drive body: Technopolymer Diffuser/s: Technopolymer Pump shaft: AISI 431 Driver/s: Technopolymer Boards: NBR/EPDM Prefilter: Technopolymer | Materials Engine casing: Aluminum Mechanical seal: Alumina-Graphite Suction body: Technopolymer Surrounding body: Technopolymer Drive body: Technopolymer Diffuser/s: Technopolymer Pump shaft: AISI 431 Driver/s: Technopolymer Boards: NBR/EPDM Prefilter: Technopolymer | Engine casing: Aluminum Mechanical seal: Alumina-Graphite Suction body: Technopolymer Surrounding body: Technopolymer Drive body: Technopolymer Diffuser/s: Technopolymer Pump shaft: AISI 431 Driver/s: Technopolymer Boards: NBR/EPDM Prefilter: Technopolymer |
Silen Plus construction features | SILEN I construction characteristics | SILEN S construction features | SILEN S2 construction features |
Sealing through: mechanical seal Engine cooling: Ventilador Suction connection type: Glue fitting Drive connection type: Glue fitting | Suction diameter: 50 mm Drive diameter: 50 mm Sealing through: mechanical seal Suction connection type: Glue fitting Drive connection type: Glue fitting | Suction diameter: Dual 50mm – 63mm Drive diameter: 50 mm Sealing through: mechanical seal Engine cooling: Ventilador Suction connection type: Glue fitting Drive connection type: Glue fitting | Suction diameter: 63 mm Drive diameter: 63 mm Sealing through: mechanical seal Engine cooling: Ventilador Suction connection type: Glue fitting Drive connection type: Glue fitting |
Limits of use Silen Plus | Limits of use SILEN I | Limits of use SILEN S | Limits of use SILEN S2 |
Maximum suction (m): 4 Liquid temperature (ºC): Max: 40 | Maximum suction (m): 4 Liquid temperature (ºC): Max: 40 | Maximum suction (m): 4 Liquid temperature (ºC): Max: 40 | Maximum suction (m): 4 Liquid temperature (ºC): Max: 40 |
Buy espa pool motors
Spy pump for swimming pool prices
Buy SILENPLUS espa water motor | Buy espa pool motor SILEN I | Buy SILEN S pool motor | Buy SILEN S2 spy motor |
---|---|---|---|
Buy espa 1cv pump | Buy espa silen i 33 8m pump | Buy silen s espa pump 0,75CV | Buy espa silen 75m pump |
ESPA Silenplus 1 CV pool pump price [amazon box=»B06X9ZJMTG «] | Espa silen i 33 8m price [amazon box=»B06X9X9TTK»] | espa pool pump silen s 0,75CV price [amazon box=»B00X9PVVTM»] | Espa silen s2 75 18 self-priming pump price [amazon box=”B06X9YLM55″] |
Buy espa pool motor silenplus 2 CV | Buy espa silen 50m | Buy silen s 75 15m | Buy espa silen s2 100 24 pool motor |
Espa silenplus 2 CV price [amazon box=”B07C8LMRC3″] | Silen i 50 12m price [amazon box=»B079Z7WS9L «] | Silen spy pump 75m price [amazon box=”B00GWESRH6″] | Espa silen s2 100 24 pool pump price [amazon box=»B00UJEK8GS «] |
Buy Silen plus 3CV pool spa pump | Buy espa silen 100m | Buy compact pool pump espa silen 100m 1 hp purifier | Buy espa silen s2 150 29 treatment plant |
silenplus 3 hp price [amazon box=»B07FSSRQBJ»] | Espa silen 100m price [amazon box=»B01FALEY00 «] | Silen s 100 18m price [amazon box=”B00RK8NQO2″] | espa silen s2 150 29 purifier pump price [amazon box=” «] |
Buy espa silen s 150 22m pool pump | Buy pool pump espa 1 5 hp | Buy espa silen s2 200 31 purification pump | |
Silen s 150 22m price [amazon box=»B01FAKD81M»] | Silen s 150 22m pump price [amazon box=”B00GWESUK0″] | Espa pools silen s2 200 31 price [amazon box=»B06X9CJN5Q «] | |
Buy espa silen s2 300 36 pool purifier motor | |||
Espa silen s2 300 36 pool price [amazon box=»B06X9WSBNV «] |
Safety when using ESPA Evopool silen plus
Safety when handling the ESPA pool pump
Safety instructions and prevention of damage to people and equipment
A | Pay attention to employment limits. |
B | The voltage of the plate must be the same as that of the network. |
C | Connect the equipment to the network using an omnipolar switch with a contact opening distance of at least 3mm. As additional protection from lethal electrical shocks, install a highly sensitive residual current circuit breaker (0,03A). |
D | If the power cord is damaged, it must be replaced with an S.T.A. |
E | Ground the unit. |
F | Use the pump within the performance range indicated on the plate. |
G | Remember to prime the pump. |
H | Make sure the engine can self-vent. |
I | This appliance can be used by children aged 8 years and over and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given appropriate supervision or training regarding use of the appliance in an safely and understand the dangers involved. Children should not play with the device. Cleaning and maintenance to be carried out by the user should not be carried out by children without supervision. |
J | Be careful with liquids and dangerous environments. |
K | Beware of accidental losses. Do not expose the electric pump to the elements. |
L | Pay attention to the formation of ice. Disconnect from the power before any maintenance intervention. |
- What type of pool pumps exist?
- What company is ESPA?
- What are ESPA variable speed pumps and their advantages
- What ESPA pool pump do I need?
- Models and Features ESPA pool pumps
- Buy espa pool motors
- Safety when using ESPA Evopool silen plus
- ESPA pool motor installation ControlSystem
- ESPA pool pump operation
- What is the ESPA Evopool purification APP?
- espa silen plus purifier pump breakdown
- Maintenance of espa self-priming pump
- Solutions to the most frequent problems with swimming pool motors
ESPA pool motor installation ControlSystem
Sileplus ControlSystem installation
Silenplus pumps are equipped with a standard electric motor with integrated frequency converter. They are for single-phase connection.
They have a radio frequency transmitter for communication with the ControlSystem® and Bluetooth® link for remote control through Smartphone applications.
These devices are designed for indoor use.
What is the ControlSystem sensor?
The sensor ControlSystem® It is the position detector for the 6-way multiport valve of a standard pool filter. It is equipped with electronic sensors for polar positioning and motor control.
The joint operation of the pumps Silenplus and the ControlSystem It allows full control of the pump functions by simply maneuvering the filter valve.
Electrical connection ESPA pool pump
The electrical installation must have a multiple separation system with a 3 mm contact opening.
The system protection will be based on a differential switch (Δfn = 30 mA).
The equipment is supplied with a power cable with a plug. Do not manipulate the equipment.
Evopool silen plus espa functions
espa evopool silen plus operating systems
Filtration Plus:
System that optimizes filtering to increase efficiency, with the consequent saving of electrical energy, while adding a cycle that increases the effectiveness of cleaning the pool surface.
- EFFECTIVENESS: The work cycles specifically developed for application in swimming pools achieve maximum efficiency.
- SAVING: a minimum of 80% savings in electrical energy compared to standard pumps, with the consequent economic savings.
Backwash Plus:
Backwash system that, thanks to a specifically developed cycle, manages to increase the efficiency of the process while shortening cleaning time, drastically reducing the amount of water consumed and achieving effective washing.
- EFFECTIVENESS: reduction of backwash time and increase in filter cleaning efficiency.
- SAVING: a minimum of 25% water savings compared to standard pumps.
Install the silenplus pump Controlsystem
Installation of the ControlSystem
Mount the ControlSystem on the filter multiport valve control.
- Select a location as close as possible to the center of rotation.
- Clean the surface with alcohol.
- Lift the protection of the adhesives and nail the ControlSystem at the chosen site.
- Pay attention to the position of the ControlSystem. The screw area must be close to the axis of rotation.
- Secure the assembly by tensioning the tape under the control. Check that it is well fixed.
Silen Plus commissioning
Initial setup
At the first start-up it is necessary to link Silenplus with ControlSystem (See fig. 2)
ATTENTION It is very important to respect the order of operations described here:
- Commissioning of Evopool
- Connect the pump Silenplus to the current.
The system will start up, a set of lights indicates that it has been activated.
A ControlSystem has not been linked previously, the pump will not start.
Silenplus is waiting to create a link. The 3 LEDs flash together.
Activation of ControlSystem
To prevent the battery from running out before starting the equipment, the ControlSystem It has an internal ON/OFF switch, which must be activated:
- ATTENTION Do not bring magnetic elements close to the ControlSystem during this operation.
- Prevent any magnetic field from altering the proper functioning of the system.
With the pump connected to the power:
- Make sure the valve is in the middle position between 1 and 4.
- Lift the cover by loosening the screw.
- Activate the ControlSystem by acting on the mini-switch, moving it to the "ON" position.
When connecting the battery, ControlSystem Issues a unique code for interference-free pairing. A flashing of the LEDs indicates that the communication has been correct. The green LED remains illuminated.
- Replace the cover and tighten the screw. Tightening torque: 0.2 Nm.
ControlSystem Calibration
The 6 valve positions must be indicated to the system. To do this, follow the following calibration process:
- – Move the control to position 4: Wait until the green LED lights up.
- – Move the control to position 6: Wait until the green LED lights up.
- – Move the control to position 2: Wait until the green LED lights up.
- – Move the control to position 5: Wait until the green LED lights up.
- – Move the control to position 3: Wait until the green LED lights up.
- – Move the control to position 1: The pump will start in mode FiltrationPlus Car. The corresponding LED will light up.
Multiple system
In an installation with various equipment, the start-up of the Silenplus and the activation of ControlSystem It must be done in an orderly manner.
Each device is linked by a unique code to avoid interference between them.
Una SilenplusIn standby mode, it will be linked to the first ControlSystem to be activated.
ATTENTION, activate the ControlSystem of the valve corresponding to the equipment in standby.
In the absence of ControlSystem
If you do not have ControlSystem or you prefer not to use it, the system can operate, with the same features, manually.
Dispense with activation and calibration operations by switching to Manual mode after connecting the Silenplus.
Change of ControlSystem
If in an already linked system it is necessary to replace the ControlSystem, it will be necessary to remove the serial number from the old one before pairing the new one.
To do this, with the pump Silenplus connected to the power, keep the button pressed F for 10 seconds. A flashing LED indicates that the operation has been carried out successfully.
The old serial number will be deleted and the system will enter “pairing standby” mode.
ESPA pool pump operation
Product description
Silenplus pumps are equipped with a standard electric motor with integrated frequency converter. They are for single-phase connection.
They have a radio frequency transmitter for communication with the ControlSystem® and Bluetooth® link for remote control through Smartphone applications.
The sensor ControlSystem® It is the position detector for the 6-way multiport valve of a standard pool filter. It is equipped with electronic sensors for polar positioning and motor control.
The joint operation of the pumps Silenplus and the ControlSystem It allows full control of the pump functions by simply maneuvering the filter valve.
How the ESPA pool pump works
Operation in automatic mode
It is the default operating mode.
The pump executes the function most appropriate to the position of the filter valve.
- In FILTERING position: function Filtration More
- In WASH position: function Backwash Plus
- In CLOSED position: pump stopped.
- In any of the other positions: the pump operates at 100% of its power.
- By manipulating the valve knob, the pump stops automatically to facilitate valve movement.
- In any intermediate position, the pump remains stopped.
To change operating modes, simply move the valve to the desired position.
- To avoid unwanted operations, the electronics response is delayed by 1 second. The flashing red LED indicates that communication has been effective.
Move the valve gently.
- ATTENTION the valve configuration must correspond to the 6 standard positions according to the figure.
- For other valve configurations, contact your technical service.
Operation in manual mode
Execution in MANUAL Mode
Pressed the key M, Silenplus ignores the signal ControlSystem and runs in one of the preset functions:
The MANUAL LED turns on.
The pump starts at a fixed, programmable speed. Standard is 2300 RPM (40 Hz). It is the so-called Mixed Cycle (MISC. CYCLE).
By pressing the key F the various functions of the Silenplus.
Between each function, the pump stops to allow valve movement or other operations.
The sequence is:
- Mixed cycle (MISC. CYCLE).
- Stop.
- Filtration Plus.
- Stop.
- Backwash Plus.
- Stop.
- Mixed cycle…
The lighting of the LEDs indicates the function selected at each moment
When you press again M exits Manual mode to return to Auto.
Failure due to lack of water and retries.
In mode Filtration More The system is regularly monitored to verify that the pump does not operate without water.
Si Silenplus detects that the pump is running without water, stops the motor.
The system will try to boot again after 1', 5', 15' and 1 hour (Fig 5). If retries are unsuccessful Evopool will be in permanent failure.
A sequence of LEDs indicates the status of the fault. (See section 9)
To interrupt the retry cycle or to reset the permanent fault, press the key F.
system status
Espa makes the application available to installers and users SpainEvopool for system status monitoring and interaction with Silenplus.
The change to modes Manual/Auto and all its functions are possible through this application.
Silen plus pump advanced configuration
Different speeds can be configured to adjust the functions to the characteristics of the installation.
The function being executed will be configured.
To configure a function, select it previously, either in Manual or Auto, and simultaneously press M+F for 5 seconds.
All speeds of the selected function are reset to factory settings [= af]
To increase or decrease the speed press M or F: M = + 1 Hz
F = – 1Hz
Filtration Plus configuration.
The filtration speed is set.
- Minimum = 20 Hz (1600 RPM), [= af]
- Maximum = 50 Hz (2900 RPM)
- configuration Backwash Plus.
The maximum and minimum speeds are configured, always maintaining a 20 Hz differential between them.
- · Minimum = 20/40 Hz (1600/2320 RPM), [= af]
- · Maximum = 30/50 Hz RPM (1740/2900)
- Mixed Cycle Configuration (Manual only) Factory setting is 2320 RPM (40 Hz)
- Minimum = 20 Hz (1600 RPM)
- Maximum = 50 Hz (2900 RPM)
If M or F is not pressed for 5 seconds, the changed values are saved and configuration mode is deactivated.
Silenplus pump scheduler activation
Silenplus pump time clock drive
- BUILT-IN SCHEDULE The bomb Silenplus It has an internal clock that can act as a start and stop time programmer, replacing the need for external programming.
With this function, Silenplus It can work completely autonomously.
ATTENTION: programming and maintenance of the timer is only possible through the application EspaEvo- pool.
- Activation of the time programmer.
DANGER. Risk of electrocution.
Never open the lid of Silenplus without having disconnected the power supply for at least 5 minutes.
- Lift the cover of the Silenplus loosening the 4 screws. (See figure 6)
- Activate the Timer by acting on the mini-switch, moving it to the “ON” position.
- Replace the cover and secure the 4 screws. Tightening torque: 0.5 Nm.
- Time programming.
Link Silenplus with the external device via Bluetooth following the instructions on the device.
Run the app SpainEvopool and follow their instructions.
How the ESPA Silen Plus pool pump works
How the espa pool motor works
Later, in this ESPA video he explains how the Silen Plus pool pumps work.
What is the ESPA Evopool purification APP?
APP espa silen plus variable speed pump
For full use of all the features offered by the variable speed pump, it is necessary to install the ESPA Evopool App for espa silen purifier motor.
EVOPOOL® means progress, and as such, it encompasses all the improvements and innovations that ESPA develops and introduces in its products and applications to swimming pools. Always guaranteeing the maximum efficiency or with a sustainable treatment of energy resources.
One of the values fundamentals of ESPA is continuous improvement to offer adapted solutions to current and future market demands, to to satisfy the needs of customers and maintain a firm commitment to the environment.
Currently, we launch the new EVOPOOL® technology, a great advance in efficiency and sustainability which is integrated into the entire range, providing efficiency, performance and respect for the environment.
Today and in the future, ESPA is EVOPOOL®.
The Silenplus pump incorporates the ESPA pool pump with the frequency converter with an important innovation in its operation to adapt the set to the pool application: the variation of speeds in the work cycles.
ESPA Evopool App functionalities for the pool pump
ESPA Evopool APP for pool motor allows you the following functionalities:
- Pump remote control
- Time programmer
- Pump parameters configuration
- Alert management
- Adaptation of the pump to the installation
Features of the ESPA pool pump application
- Simplify pump start-up and use
- Weekly scheduler
- Management of pump parameters
- Energy savings calculator
- Remote pump assistance
- Self-diagnosis
- Pump upgrade (firmware)
- Filtration Rate Calculator
ESPA Evopool APP operation for silent pump
How ESPA Evopool APP works for espa pool purifier motor
Download APP Evopool espa pool motor
Download espa pool motor application
espa silen plus purifier pump breakdown
Parts of the SIlen Plus pool bimba
Buy ESPA SILENPLUS Pump Spare Parts
Original ESPA spare parts for pool pumps
In Pool Moments, like official distributor of ESPA spare parts, We have original ESPA spare parts and with all the guarantees and quality certificates Of the brand. Remember that buying original spare parts not only ensures a perfect adaptation to the pump, but also that there are no fit problems. In addition, the aesthetic finish will be of higher quality and similarity to your ESPA water pump.
ESPA pump spare parts depending on model
- ESPA IRIS Pump Spare Parts
- ESPA SILEN Pump Spare Parts
- ESPA SILEN I Pump Spare Parts
- ESPA SILEN S Pump Spare Parts
- ESPA SILEN S2 Pump Spare Parts
- ESPA SILEN 2 Pump Spare Parts
- ESPA SILENPLUS 1M Pump Spare Parts
- ESPA SILENPLUS 2M Pump Spare Parts
- ESPA SILENPLUS 3M Pump Spare Parts
- ESPA NOX 75 15M / 100 18M / 150 22M Pump Spare Parts
- ESPA NOX 33 8M / 50 12M / 100 15M Pump Spare Parts
Maintenance of espa self-priming pump
ControlSystem:
Si ControlSystem does not communicate with Silenplus It may be necessary to replace the battery. Proceed according to figure 7.2
The battery is type CR2450.
Silenplus:
Our teams Silenplus They are exempt from maintenance. The Silenplus time programmer works with a CR1220 type battery. To replace it, proceed according to figure 7.1
Silenplus Maintenance
Our teams Silenplus They are exempt from maintenance. The Silenplus time programmer works with a CR1220 type battery. To replace it, proceed according to figure 7.1
Clean the equipment with a damp cloth and without using aggressive products.
In times of frost, be careful to empty the pipes.
If the equipment is going to be inactive for a long time, it is recommended to dismantle it and store it in a dry and ventilated place.
ATTENTION: in the event of a breakdown, manipulation of the equipment can only be carried out by an authorized technical service.
When it comes time to discard the product, it does not contain any toxic or contaminating materials. The main components are duly identified to be able to proceed with selective scrapping.
Disposal of this product or parts of it must be carried out in an environmentally friendly manner, please use the local waste collection service. If this is not possible, contact the nearest ESPA technical service.
LED indicators
The possible combinations of LEDs and their meaning are: 0 = Led OFF
1 = LED ON
2 = Slow flashing LED
3 = Fast flashing LED (flash)
CAR/ MANUAL/ FAULT | BACKWASH More | FILTRATION More | State of Silenplus |
Features | |||
0 | 0 | 1 | Function Filtration Plus in Auto mode. |
0 | 1 | 0 | Function Backwash Plus in Auto mode. |
0 | 1 | 1 | Mixed Cycle Function in Auto mode. Engine at 100%. |
1 | 0 | 1 | Function Filtration Plus in Manual mode. |
1 | 1 | 0 | Function Backwash Plus in Manual mode. |
1 | 1 | 1 | Mixed Cycle Function in Manual mode. |
2 | 0 | 0 | "Standby" mode. Equipment on voltage, engine stopped. Valve in intermediate positions or in position 6 in Auto mode. Stop function in Manual mode. Timer OFF position. |
Configuration | |||
3 | 3 | 3 | Initial configuration: waiting for link with ControlSystem |
( . . . jointly…) | |||
3 | 0 | 1 | Speed setting Filtration Plus. |
3 | 1 | 0 | Speed setting Backwash Plus. |
3 | 1 | 1 | Mixed Cycle speed configuration. |
Errors | |||
2 | 1 | 2 | Error due to lack of water. Boot is retried. |
2 | 1 | 1 | Lack of water error. Definitive stoppage. |
By moving the control ControlSystem: | |
Number of flashes | State of ControlSystem |
3 | El ControlSystem is not linked to any Silenplus. |
2 | Communication error. Notify technical service. |
1 | El ControlSystem works correctly. |
0 | Replace the battery ControlSystem. |
Disassembly of ESPA Silen pool pumps
Pool spy motor disassembly
Video tutorial for the disassembly and repair of ESPA Silen pool pumps. This video is valid for the Silen range pumps: Silen I, Silen S, SilenPlus and Silen S2. This process must be carried out by a professional and never within the product warranty period. ESPA is not responsible for any damage caused by improper handling of the product.
How to change the Silen pump for the Silen Plus low consumption pump
Change to silent espa pump plus variable speed
Next, video to show how to change the conventional Silen pool pump for the espa silen plus variable speed, low consumption, silent and self-regulating pump.
Espa Silen pool pump update
In this video we show you the change from the Silen model pump to the ESPA Silen S pool pump.
Solutions to the most frequent problems with swimming pool motors
ESPA pump does not start
Fault: spy pump does not start
Possible causes of the espa pump failure not starting:
- Lack of water: If the tank or well runs out of water, the pump stops for safety. Check why the water supply has been cut off and solve the problem.
- Air buildup between check valve and pump: Very often, when installing a submersible pump, the mistake is made of placing the check valve too close to the outlet. This causes air to accumulate between the valve and the pump, causing the pump to run out of water inside and lose driving force. It is advisable to place the check valve at a minimum distance of 1m from the pump.
- The level probe: Probes tell the submersible pump when to start or stop. If a probe breaks, the pump stops working.
- Condenser: It is a white cylinder that you will only find in pumps with single-phase electrical power. It is responsible for giving the necessary power to the engine to start. If the capacitor has broken down, you will have to replace it with another one that has the same characteristics. Make sure you have connected the two cables well.
Video espa pump repair does not start
Spy pump leaks water
Pool pump leaks water
- Check the seal of the pump motor seal.
- Check the pool pipes.
- 1. Poor condition of some element such as the pre-filter gasket, the stuffing box.
- 2. Break or crack in any pipe.
Tip: Flush the cooling system thoroughly before installing a new water pump to remove contaminating particles. To do this, observe the rinsing procedures and means recommended by the manufacturer.
How to change mechanical seal of the pool pump
ESPA pool pump does not drive as it should
Possible causes of why a pump is not pumping the way it should:
- Blockage in the skimmer or pump prefilter.
- The impeller has a crack.
ESPA pool pump makes noise
In case VIBRATION NOISE occurs
- A small bearing that fixes the pump.
On the other hand, if the NOISE we hear is CAVITATION
- Jam or crack.
SHARP NOISE (like a screech)
- Bad behavior of the pump.
The ESPA pool motor does not stop
Possible causes why the espa silenplus pool pump does not stop:
- The level probe: If the pump does not stop working, it may be because the level probe, which should give the stop order, is faulty.
- The pressure switch is faulty or out of adjustment: If the pressure switch is out of adjustment, it will cause the pump to also work out of adjustment and not stop. You must tighten the pressure switch well, taking into account that almost all models incorporate two screws: one to regulate the pump start pressure and the other the stop pressure.
- The hydrosphere membrane is perforated: When that happens, the pump starts and stops constantly. Checking the pressure in the hydrosphere will also detect the problem. Normally the membranes include a valve like those on bicycles to which a sump or a compressor can be attached.
- There is a water leak in the house: The water pumps are prepared to provide pressure to the home whenever it is necessary, therefore, when there is a water leak, the pump works non-stop to continue maintaining the pressure in the circuit. This fault is the most difficult to control, since you must locate where the leak is and repair it. This will make the pump stop.
The ESPA pool pump has caught air
Possible cause of air entering the pump
- Damaged mechanical seal: Change the mechanical seal, although since it is an expensive repair, it is advisable to purchase a new pump.
How to prime the purifier pump because it has caught air
ESPA pool pump burned by humidity
Pool spy motor repair burned by humidity
Repair ESPA PRISMA pump (electrical part)
Repair ESPA PRISMA pump (electrical part)
Most frequent problems in the pool motor pump
Consecutively, we leave you the link so you can consult the specific page of the Pool pump: heart of the pool, which focuses all the movement of the hydraulic installation of a pool and moves the water in the pool. So, at eellate we basically tell you what the pool pump is, its installation and its most common breakdowns.