Skip to content
Ok Pool Reform

What maintenance does a reinforced liner pool need?

Maintenance and care of the reinforced liner pool: what practices and techniques are appropriate to maintain its properties.

What maintenance does a reinforced liner pool need?
What maintenance does a reinforced liner pool need?

To begin with, within Ok Pool Reform and in summary of page explanation ALL the INFO about reinforced sheets for swimming pools CGT Alkor We want to clarify the question for you: What maintenance does a reinforced liner pool need?

What does pool liner maintenance entail?

removable pool liner maintenance
removable pool liner maintenance

Guide to pool liner maintenance

First of all, in this entry, we summarize a Pool liner maintenance and care manual, so that it is easy to understand and with simple and effective procedures.

In short, a guide to maintaining pool water, where we cover everything related to routine pool maintenance: Water disinfection, water filtration, pool cleaning and maintenance of the pool liner:

Diagram with the important points in the maintenance of the liner

Next, so that you have a mental outline of what liner maintenance entails, we will give you a list of the essential points about maintaining the liner and then we will develop them one by one throughout this post..

  1. First of all, pool liner maintenance must be based on some security bases that previously we have to worry about being knowledgeable.
  2. Secondly, it is essential to determine, preserve and take control within an agenda for a routine that involves pool liner maintenance and cleaning and pool care; taking into consideration that the products and the procedure must be adapted to products expressly used for pool liners.
  3. On the other hand, it is essential to know why it is necessary to filter pool water, the importance of ensuring water recirculation and how to calculate the necessary hours of filtration. In addition, examining and taking care of the pool filtration system is vital considering that pool filtration varies depending on circumstances (especially atmospheric).
  4. Next, one of the most important points, evaluate parameters and chemical values ​​typical of the treatment and disinfection of pool watera.: why disinfect the pool, when to disinfect it; You have to know the most important parameters of the chemical values ​​of the water and know how to control the ideal parameters and ultimately act if necessary on imbalances in the disinfection levels.
  5. Determine that if you want to change the pool water disinfection system, There are systems that are not suitable for pool liners.
  6. For this reason, if you use automated equipment (salt chlorinator, automatic pH regulator, etc.), it is necessary to have an understanding of its operation compared to pool liner maintenance.
  7. At the same time, keep in mind the essential rules for chemical maintenance of pool liner water (for example: you cannot throw chemicals directly into the pool, our pool liner can react to contact with certain materials, etc.).
  8. Learn how to use the right water: how to fill the pool water and the importance of not leaving the pool glass with assembled liner empty.
  9. Even more, Apply measures to avoid contamination of pool water.
  10. Equally, Ensure pool water temperature suitable for the liner, it being very relevant that it is not too high.
  11. In turn, we must Avoid at all costs contact with materials that are harmful to the pool liner.
  12. Likewise, Use non-abrasive cleaning products designed especially for swimming pools. Therefore, learn how to perform pool liner cleaning maintenance and specifically know how to clean the waterline.
  13. In the same way, there is also a preparation of liner pools against winter.
  14. Such is the case that there are also some precautions when covering the pool with liner.
  15. To conclude, occasionally carry out thorough inspections of the condition of the assembled pool liner.

Maintenance manual for reinforced sheets for CGT Alkor pools

reinforced sheet pool
reinforced sheet pool

Routines and techniques to maintain the liner and the pool

There are several routines and techniques to maintain the liner and the pool, due to the negative effects that the sun, dirt and the chemicals used to clean them generate on pool canvases.

The reinforced liner is a very resistant material with significant durability, but it also requires care, adequate maintenance and pool rehabilitation to extend its useful life for much longer. Regular maintenance prevents the canvas from completely deteriorating.

Liner maintenance basically has two ways of being carried out, which include cleaning an empty pool or maintaining a pool with water, which have important differences that pool administrators know, as well as reform a pool.

Maintenance of assembled liner in empty pool

  • Liner maintenance in empty pool.
  • In this case, it is important to only use soft products to clean the canvas, which must be applied with a sponge or cloth and carefully.
  • Another detail that you cannot forget is that the people who do this cleaning must be barefoot so as not to damage the liner material and renew pool in a timely manner.

Pool liner maintenance with water

  • Liner maintenance in pool with water, you have to be attentive What maintenance does a pool have to do?, for this type of coating and do not use chlorine tablets because they can cause burns to the liner material and that even when the pool is full, the products indicated to carry out water treatment in reinforced liner pools must be used.

What maintenance does the reinforced liner require?

Pool maintenance with liner
  1. What is the right water for the pool and its correct filling?
  2. Pool Filtration
  3. The water temperature with the pool with reinforced sheet
  4. Proper use of chemicals
  5. Ideal chemical values ​​in the treatment and maintenance of pool liner water
  6. Evaluate the PH of the pool water
  7. Pool reinforced sheet and pool water alkalinity value
  8. Adequate level of cyanuric acid (chloramines)
  9. How to clean the surface and glass of the pool liner
  10. Protection of the pool from external phenomena

1st maintenance point for reinforced sheets for CGT Alkor pools

What is the right water for the pool and its correct filling?

Tip 1 Pool liner maintenance Filling the water in your pool for our reinforced sheet

fill pool
  • The water supplied by the public network – in other words, drinking water – is particularly adapted to filling your pool.
  • If you use water from a well, you should ensure that it does not contain heavy metals, such as iron, copper or magnesium. These metals can stain the reinforced sheet.
  • In regions with high levels of water hardness, the use of products that reduce the concentration of lime in the water is recommended.
  • In regions with high levels of water hardness, the use of products that reduce the concentration of lime in the water is recommended.
  • It is recommended not to leave the pool glass without water for more than two weeks. Pool water helps secure the liner and by draining the water you risk damaging it.
  • Entry related to pool lime: How to avoid lime in the pool, pool water hardness.
armed liner pool maintenance

Do not use well water or water from an unknown source to fill the pool.

  • First of all, if the water does not come from the drinking water network or from a guaranteed tank, it is very likely that it contains dissolved metals such as iron, copper or manganese.
  • Additionally, these minerals can react with chemicals and cause permanent stains on the membrane.

Caution with mains water

Caution: Sometimes tap water itself already contains traces of copper
  • First of all, especially if it circulates in old pipes.
  • Essentially, what can happen is that the level of copper in the water should not be higher than 0,02 mg/l. IF this is the case, a sequestrant must be added to reduce this level.

2nd point in the Pool Liner Maintenance Guide

Pool liner maintenance: Pool Filtration

pool filtration
pool filtration

What is pool filtration

  • Pool filtration is the procedure for disinfecting pool water., that is, the cleaning of particles that may exist on the surface and in suspension.
  • After disinfecting the pool
  • After disinfecting the pool, we will leave the pool filtration on for at least one entire cycle (preferably for 2 cycles in a row).
  • When pool filtration is necessary
  • Pool filtration is always necessary to a greater or lesser extent (depending on water temperature).
  • More info: https://okreformapiscina.net/filtracion-piscina/

Elements in pool filtration

All pools have a filtration system with its proper elements to keep the water clean, free of algae and bacteria.

The filtration system that is made up of the appropriate pool filtration equipment: pump, filter, selector valve, pressure gauge, etc. It will retain the dirt that accumulates inside the pool glass and therefore keep the water crystal clear and clean.

Main components of the pool filtration system

Next, we mention the essential elements for a pool filtration system.

  1. The pool purifier
  2. Filter load for pool purifier: sand of flint o filter glass.
  3. Pool selector valve
  4. Pool pump
  5. Components / accessories of the pool hydraulic system (skimmer Swimmingpool, pool nozzles, pool pipes, swimming pool electrical panel, pool treatment house

Why is it necessary to filter pool water?

  • First of all, it is vital that the pool water does not stagnate, and therefore is continually renewed.
  • Get crystal clear water.
  • Avoid algae, impurities, pollution and bacteria
  • Type of pools that must be filtered: All.

Ensure water recirculation

  • It is important to ensure water circulation, since without water movement, stagnation occurs.
  • Therefore, the concentration of the chemicals present skyrockets and can reach very high concentration levels.
  • Or also a significant increase in heat in some area and cause irreversible degradation in the water or in the conditions of the pool lining.

Calculation of pool filtration hours

Very generic formula to determine the filtering time (filtering cycle):

Water temperature / 2 = pool filtering hours

3nd point in the Pool Liner Maintenance Guide

The water temperature with the pool with reinforced sheet

Ideal pool water temperature

What is the ideal pool water temperature?

high temperature pool

The ideal water temperature in your pool liner

What impact does the water temperature have on our liner pool?
  • Water temperature, or heat accumulation in the air and water, is a key aspect for the maintenance of the pool liner.
  • In the case of a closed pool, the air can reach more than 60˚C and the water more than 40˚C, the consequence of which will be irreparable damage.
  • The water temperature should not exceed 32ºC, and even less in the case of having an armed liner!! Otherwise, wrinkles or discoloration may appear on the coating.

If the water temperature is too high

-Alert for high temperatures

  • The accumulation of heat in the air and water damages the pool reinforced sheet.
  • Poor water recirculation in an enclosed pool causes a lot of heat buildup under the cover.
  • Air can reach more than 60˚C and water more than 40˚C, the consequence of which will be irreparable damage to the reinforced pool liner.
maintain pool water temperature

The water temperature should not exceed 32 degrees Celsius.

If the value is too high:

The effectiveness of the disinfectant (chlorine or other) decreases considerably; A higher concentration of chlorine will be needed, the consequence of which will be the risk of discoloration of the sheet; Wrinkles may appear on the surface of the sheet.

Ideal pool water temperature value

Given whate, the International Swimming Federation (FINA) sets a temperature between 25 and 28 degrees for sports use in the water. On the other hand, for recreational use, a temperature between 26 and 30 degrees represents an ideal value.

Caution : Covered pools and/or heated pools can accumulate a large amount of heat in the water, exceeding the maximum recommended temperature limit.

covered pool with pv pool coating
Regarding this, we provide you with the entry of: Types of pool covers with their advantages.
  • This circumstance will cause irreparable damage to the pool liner.

4th point maintenance of reinforced sheets for CGT Alkor pools

Proper use of chemicals

chemical products for pool maintenance

What are the essential pool chemicals for maintenance?

  • Pool chemicals What product to put in the pool, which are the best for maintenance and we will consider its analysis

Never put a chemical product in direct contact with the PVC sheet.

pool skimmer operation
  • Use only non-abrasive cleaning products designed specifically for swimming pools.
  • Furthermore, industrial or domestic cleaning products should not be used (such as powder detergents, stain removers, degreasers, etc.) as they are not approved for cleaning the pool and will damage the coating.
  • The proper and safe way to use any chemical product in the pool is by introducing it into the skimmer with the filtration system running periodically.
In case of powder, granular or liquid chemical product and you want to dose it directly into the pool
  • Additionally, it must be previously dissolved in a bucket with water and poured into different areas of the pool, dispersing it, always with the filtration system running in order to avoid its concentration in any specific area.

Caution:Avoid the use of floating dispensers

pool bromine dosing float
pool bromine dosing float
  • Since, they tend to remain immobile for too long in the same area and the high concentration of chlorine will bleach the membrane.
  • In the same way, in no case can there be chlorinated products in the skimmers with the filtration system stopped for a long period of time (in winter for example).
  • The high concentration of chlorine will stain the sheet irreversibly, in addition to forming wrinkles in the coating.

Do not use chemicals containing copper

copper-free pool greenhouse
copper-free pool greenhouse
Both copper-containing chemicals and copper ionization-based disinfection systems are not compatible with PVC coatings.
Copper causes stains on the surface of the sheet.

Look carefully at the label for the composition of chemical products, particularly algaecides that contain copper sulfate. Use quartanary ammonium-based algaecides; In addition, these are preferable for the care of your hair and skin.


5nd point in the Pool Liner Maintenance Guide

Ideal chemical values ​​in the treatment and maintenance of pool liner water

pool water treatment

Swimming pool water treatment

Ideal chemical values ​​in pool water disinfection

pool liner water maintenance
pool liner water maintenance

The Value of Chlorine

Ideal pool chlorine value

Ideal stabilized chlorine value

 The recommended free chlorine value is 1 to 3 ppm (mg/l) for stabilized chlorine (powders or tablets).

Ideal value for unstabilized chlorine

  • From 0.3 to 1.5 ppm (mg/l) for unstabilized chlorine (liquid chlorine or chlorine produced by salt electrolysis).

Consequences if the free chlorine concentration is too low:

  • Disinfection is not done correctly.
  • Water quality deteriorates.
  • It promotes the formation of biofilm on the reinforced sheet, which can cause stains on your pool liner.

Consequences if the free chlorine concentration is too high:

  • Wrinkles form on the surface of the reinforced sheet.
  • The pool liner suffers a loss of color.
  • The pool liner ages much faster.
If the free chlorine concentration is too low:

Disinfection is not carried out correctly and water quality deteriorates; It promotes the formation of biofilm on the surface of the sheet, which can cause stains.

If the free chlorine concentration is too high:

Wrinkles form on the surface of the sheet; the sheet becomes discolored and whitened; the sheet ages faster; bathers' skin is irritated.

Shock chlorination

granular shock chlorine
granular shock chlorine

What is shock chlorination for?

  • Shock chlorination is used to increase the chlorine rate when appropriate or if algae formation begins.

How to perform shock chlorination in the pool

  • The 20 Gr tablets are placed in the skimmer basket (one tablet per m3 of water).
  • EXAMPLE: 50m3 = 50 tablets
  • After performing shock chlorination, leave the filtration running for at least 12 hours (it is advisable not to bathe).
  • For more information: Pool shock treatment

Caution with pool reinforced sheeting and salt chlorination

installed salt chlorinator

What is salt chlorination, types of Saline Electrolysis equipment and difference with chlorine treatment

In the aforementioned blog you can find: What is salt chlorination, types of Saline Electrolysis equipment and the difference with chlorine treatment.

At the same time, we will also discuss different topics of saline electrolysis: advice, tips, differences, etc. on the types and varieties of existing salt chlorinator equipment.

Monitor water disinfection by saline electrolysis

  • Chlorine produced by salt electrolysis is more aggressive than stabilized chlorine in tablet or powder form. To soften it, add 30 ppm of chlorine stabilizer (isocyanuric acid) at the beginning of the season. If your electro-chlorinator does not have an automatic controller that regulates the chlorine level, you will have to control it manually with the help of a meter.

Be careful when treating water with bromine if you have pool PVC sheet

pool bromine dispenser

Find out what it is and how to use bromine water disinfection in swimming pools.

Bromine pool, spa and hot tub: learn all about healthy disinfection with bromine; Whether it is bromine, its advantages and disadvantages, necessary amount, type of dosers, bromine formats, tips for its maintenance, shock treatment, what to do when it is high, how to lower it, etc.
Maintaining a pool with bromine has become one of the best alternatives for performing periodic pool maintenance.

Bromine has a high level of tolerance to pH variations and has been proven effective in eliminating fungi, algae, viruses and bacteria.

Additionally, due to its natural oxidation process, it is responsible for eliminating organic matter present in the water of swimming pools or spas.

Ideal pool bromine level

In pools disinfected with bromine, its level should be 1 to 2 mg/l and the pH between 7-8.

Consequences of excess bromine
  • Excess bromine will cause the membrane to turn brown.

Reinforced sheet pool disinfected with ozone

Ozone values ​​in PVC pool lining

In swimming pools disinfected with ozone, residual ozone in water should be kept below 0,01 mg/l.

6nd point in the Pool Liner Maintenance Guide

Evaluate the PH of the pool water

pool pH level

What is the pool pH level and how to control it

measure ph pool
measure ph pool

What is pool pH

  • First of all, it is necessary to carry out a thorough evaluation of the pH of the water.
  • Although, the appropriate levels would be between 7.0 and 7.6. The ideal pH of pool water is: 7,2.
  • In conclusion, this point is one of the most important in pool maintenance, since if it is not maintained that adequate pH values ​​in the pool water, the disinfectant will not have any effect and the pool liners may be affected with apparent wear.

Consequences when you have a low pool pH (less than 7.0):

The recommended PH value is between 7,0 and 7,6.

pool ph and chlorine test
If the value is less than 7,0:
  • Metals in contact with water oxidize, causing stains on the coating; The sheet ages more quickly and wrinkles may appear on the surface of the material.
If the PH value is greater than 7,6:
  • The disinfectant (whether chlorine or other) decomposes very quickly, which considerably reduces its effectiveness; Lime deposits will appear on the surface of the sheet.

7th point maintenance of reinforced sheets for CGT Alkor pools

Pool reinforced sheet and pool water alkalinity value

how to measure pool alkalinity
Then, specific page of: Pool alkalinity control.

It is necessary to maintain the TAC between 100 ppm and 175 ppm.

TAC (total alkalinity) represents the ability of water to neutralize acids. A TAC lower than 100 ppm makes the water corrosive and will cause irreversible damage to the sheet. It is recommended to check this value weekly, particularly when it has rained because rain usually unbalances the TAC. Furthermore, a balanced TAC prevents the pH from fluctuating and getting out of control.

8º Pool liner maintenance - Water Pollution

Adequate level of cyanuric acid (chloramines)

pool cyanuric acid test
pool cyanuric acid test

Check for cyanuric acid in the pool

  • Check the cyanuric acid level approximately once every two weeks.
  • The level of cyanuric acid (chloramines) nor should exceed the parameter: 30 – 50 ppm.
  • Below 30 ppm, the chlorine will be consumed quickly and will not perform its disinfectant function.
  • In the case of high cyanuric acid levels, when they exceed 100 – 150ppm.They increase the toxicity of the water, and block the disinfection capacity of chlorine and can also be harmful to health: itchy skin and eyes and a strong smell of chlorine.
  • Avoid water pollution (if possible) by showering before bathing and cleaning the edges of the pool with products designed for pool maintenance.
  • NOTE: Sun creams, oils and cosmetics may contain substances that combine with metal ions present in the water (e.g. iron and copper) and are intensified by the action of the sun, staining the PVC pool liner at the height of the surface. waterline.

Avoid saturating the pool with cyanuric acid

  • In view of the usual regulations of many swimming pools, which require bathers to shower before bathing, this is a key aspect for maintenance.
  • That is, another way to protect water contamination is to clean the waterline of the pool and the edges of the pool.
  • NOTE: Sun creams, oils and cosmetics may contain substances that combine with metal ions present in the water (e.g. iron and copper) and are intensified by the action of the sun, staining the pool coating and stressing the pool liner. of PVC, at the height of the waterline.
  • Finally, it is very important to keep the reinforced pool liner clean at the height of the waterline with products specifically designed for cleaning PVC liners. 

9th point maintenance of reinforced sheets for CGT Alkor pools

How to clean the surface and glass of the pool liner

Schedule a few systematic days to clean the pool liner

liner care
liner care

Cleaning your pool liner and disinfecting the water is essential to ensure your comfort, protect your equipment, and keep it clean and safe for everyone to enjoy.

Keeping your pool in good condition and properly cleaned could prolong its life, prevent the growth of bacteria, and delay necessary repairs.

How often to clean

It is important to clean and brush your pool regularly to keep your pool looking great and relaxing.

  • During swimming time, the pool maintenance professional will be in charge of proper cleaning and monitoring of the pool twice a week.
  • On the other hand, at other times of the year, once a week will be enough.
  • Spend at least five to ten minutes cleaning and brushing your pool every few days to keep your pool sparkling clean, or find trusted pool experts to do the job for you.

Products Pool PVC sheet cleaning

how to clean pool

Useful guide to know how to clean the pool

Above all, we encourage you to consult our page dedicated to Cleaning a pool: all kinds of tips and warnings along with a guide for both set-up and routine maintenance.

Do not use abrasive utensils

  • In order not to damage the surface of the film, cleaning should be carried out only with soft sponges, soft cloths and soft brushes.
  • Use nonabrasive cleaning products designed especially for swimming pools.
  • Industrial or household cleaning products should not be used (e.g. never use abrasive cleaning tools such as bristle brushes, cleaning pads or steel wool, washing powder or degreaser) as they are not approved for cleaning. of the pool and can damage our pool liner.
  • Nor can you use cleaning machinery with high-pressure water.

 Specific products for liner

  • In the case of cleaning the pool liner It should be carried out only with soft sponges, non-abrasive cleaning products designed especially for swimming pools. soft cloths and soft brushes. Never use elements that can damage the surface of the reinforced sheet, such as metal brushes or pressure water cleaning machinery.
  • Do not use industrial or domestic cleaning products (e.g. powder detergent or degreaser) as they are not approved for pool cleaning and can damage our pool liner.

The Cleaning Team

  • Cleaning our pool liner should be carried out only with soft sponges, soft cloths and soft brushes.
  • Never use elements that can damage the surface of the reinforced sheet, such as metal brushes or pressure water cleaning machinery.
  • In order to improve the cleaning of the pool basin, we advise you to purchase a: automatic pool cleaner.

Avoid limescale with the PVC pool liner

pool lime scale
Effects, measurement, treatments and removal of lime in the pool

You can also refer to our article specialized in: Effects, measurement, treatments and elimination of lime in the pool: combat its consequences, making cleaning, installation maintenance and water treatment more difficult.

Depending on the level of lime in the water in your area, lime scale may appear on the surface of the coating.

If your water is very hard, you will need to use a lime sequestrant to lower the hardness of the water.

How to clean the pool liner:

liner maintenance
liner maintenance

Cleaning maintenance of the pool liner bowl

  • Always brush the pool towards the ground: When brushing dirt from walls, always start from the top and brush toward the floor. That way, the debris will fall to the ground and be sucked up during vacuuming instead of floating in the water.
  • Don't forget to pay attention to hard-to-reach areas.
  • Invest in an automatic pool cleaning robot.

How to clean the waterline liner: Use a specific sponge to clean the edge of the pool liner

waterline sponge

Always keep the waterline clean.

The waterline is the most attractive area of ​​the pool.
  • Impurities in water, whether of chemical origin (such as sun creams, oils, cosmetics, etc.) or of organic origin (such as pollen, leaves, etc.), float and concentrate at the height of the waterline. They deposit on the walls and create unsightly stains on the PVC sheet.
  • Likewise, these spots are intensified by the action of the sun.
  • Primarily, keep the sheet clean at the waterline with products specifically designed for cleaning PVC coatings.

Clean pool liner edge routinely

  • To clean the edge of the pool liner, use a pool surface cleaning rubber, especially indicated for cleaning the waterline.
  • It is made from a proprietary foam that has the ability to harden when humidified. This hardened part is both soft and flexible, allowing for easy use.
  • Effectively removes stains embedded in plastic materials, without the need to add detergents or chemicals.How to

Price for sponge to clean waterline liner

Wohlstand 2 Pieces Swimming Pool Sponge Brushes Swimming Pool Cleaning Wall Brush Pool Brush Cleaning Tools for Scrubber Water Lines Spas Jacuzzis Fish Tanks
Bestway Clearwater Miracle Sponge Eraser Pad Suitable for Lay-Z-SPA Pools/SPA/Boats/Kitchens and Furniture - White, 3 Pieces
Cleaning Block 10023EI Pool Cleaning Block, 12 Units
«Pool Gom Toucan» – Special eraser for cleaning walls and plastic parts, for pool & Spa – Pack of 9 pieces

How to clean waterline liner: Use a degreaser along with the sponge

Descaler product characteristics to learn how to clean liner waterline

  • The liner pool descaler makes cleaning the pool liner waterline effective. Elimination of limescale, organic waste and mineral sediments that form over time and adhere to the surfaces of liner, polyester or fiberglass pools.
  • Perfect for cleaning the glass (bottom and walls), beaches, to clean the waterline, pool liner, stairs, etc.
  • It works by quickly penetrating and removing rust stains, smoke and various dirt, without causing discoloration or damaging the coating.
  • So that you can obtain more information, here is the link to: Pool descaler: pool chemical product designed to remove limescale, clean the pool and waterline and ensure hygiene and water quality.

End of yellowed pool liner edge: how to use specific degreaser

  • Applying undiluted product on a cloth or sponge, rubbing the areas to be cleaned will make the task of cleaning the liner waterline effective.
  • In cases of persistent dirt on surfaces close to water level, it is advisable to lower this level to achieve greater product effectiveness.
  • For the same reason, it also serves to clean removable pool waterline

clean liner waterline: Price of the best liner pool descaler

CTX-53 Polyester and Liner Pool Descaler 5LTS.
Gres & Vinyl Cleaner waterline cleaner in tile, liner-vinyl, painted and fiberglass pools. 750 ml bottle
Pool Waterline, Edges and Walls Cleaner – 5 Liters
PQS Strong waterline descaling and degreasing cleaner Bottle 1 Lt

How to clean the pool bottom manually of your pool liner

Next, we leave you the link so you can find out more on our specific page Clean pool bottom manually

Mainly, in the aforementioned link you will be able to learn how to clean and maintain the bottom of your pool manually.

Automatic pool cleaning of your pool liner

On the other hand, here we tell you the essentials of cleaning the pool manually, but you can also advise you on automatic pool cleaning (basically it is a robot),

10th point maintenance of reinforced sheets for CGT Alkor pools

Protection of the pool from external phenomena

reinforced sheet for swimming pools with cover

Protect the pool from outside contamination in summer and winter.

Swimming pools are designed to be filled with water.

It is not advisable to leave them empty for long periods because the balance of forces in the structure is altered (the weight of the water versus the pressure of the ground).

Precautions when covering the pool

  •  When using a pool cover, the water temperature can very quickly exceed the maximum level, above which the reinforced pool sheet suffers damage to its surface.
  • Furthermore, without the movement of water, the concentration of the chemicals present skyrockets and can reach very high levels, the effect of which would damage the assembled pool liner.
 With the indoor pool, it is important: 
  • Control the water temperature: must be below 32˚C.
  • Control the concentration of chlorine in the water: de 1 to 3 ppm (mg/l) for stabilized chlorine and 0.3 to 1.5 ppm for unstabilized chlorine.
  • Do not leave the water without recirculation for more than one hour to avoid stagnant water with heat or chemical buildup in certain areas (particularly around skimmers, sump, corners, etc.)

Protect pool in summer

pool thermal blanket

Thermal pool blanket

  • Likewise, if we have a reinforced PVC sheet, it is vital to maintain the appropriate water level for the proper functioning of the hydraulic circuit.

Preparing the pool for winter

How to winterize a pool

How to winterize a pool: prepare a pool for winter

  • Lower the water level below the skimmers.
  • Tightly close the suction and return nozzles, drains and other intakes.
  • Bleed all the pipes of the hydraulic circuit as well as the filter.
  • Place floats in the water to absorb the increase in pressure caused by the ice.
  • Since the filtration system is stopped and the water level has dropped, it is essential to cover the pool with a cover with UVA protection.
  • We suggest you consult our star product for winterizing the pool: winter cover
Wintering the pool means protecting the reinforced pool sheet against:
  • The pollution present in the air.
  • The action of UVA rays.

Pool Hibernation

winterize the pool
Maintain pool with reinforced sheet in winter
  • At the same time, with the pool reinforced sheet out of service, the water level can rise (due to rain) or fall.
  • Additionally, if the pool is in a region with frost, the water level must be lowered below the skimmers and the hydraulic circuit must be purged.
  • Also place floats to absorb the increase in water volume caused by ice.
  • Obviously, winterizing products must be compatible with PVC coatings.
  • Specifically, the treatment of the pool throughout the winter will be decisive for the longevity and quality of the pool water itself.
  • Finally, indicate that it is good to consult with your specialist about the appropriate hibernation treatment for your pool.

In general, it is advisable to use a cover all year round,

Empty or partially empty pools must be protected by a cover to avoid stains on the sheet caused by pollution and the aggression of solar radiation.
Safety cover for bar pools

This way we avoid contamination of the water with external elements such as leaves, pollen, atmospheric pollution, etc.

Types of pool covers with their advantages

Advantages of the pool cover

What does indoor pool mean? Very clearly it means that an indoor pool guarantees you an impressive number of advantages.

11th point maintenance of reinforced sheets for CGT Alkor pools

Automated equipment for maintaining the water of the pool liner

Salt chlorination

installed salt chlorinator
salt chlorinator installation

What is salt chlorination

  • Saline chlorination replaces the slow chlorination usually carried out by chlorine tablets.
  • 5 GR of salt / liter of water is deposited in the water. EXAMPLE: 25 m3 = 125Kg of SALT
  • When the water temperature is below 15 degrees, the salt chlorination device must be turned off, as the electrodes deteriorate.
  • Once the salt chlorinator has been turned off: We must have two 200g slow chlorine tablets in each skimmer basket. Therefore, as soon as we verify that they have dissolved, we will put two tablets in each of the skimmers again.
  • More info at: saline electrolysis.

AUTOMATIC PH REGULATOR

automatic pool ph regulator
automatic pool ph regulator

What is automatic pH regulator

  • The automatic PH regulator is programmed to regulate the PH (neutral) when it has become destabilized (raised) for different reasons.
  • Check that the liquid PH bottle is always full.
  • The most frequent causes of a rise in PH are a rain of mud or a very sudden change in environmental temperature.
  • Finally, more info at: automatic pH regulator.

Details of pool lining with reinforced sheet

automatic ph and chlorine control
Automatic pool pH regulator

Automatic pool pH regulator

The automatic pH regulator device is a self-contained system that comes into operation when the probe detects that the pH parameter is incorrect.

In this way, as soon as it detects the need, the device itself injects liquid contained in a bottle (liquid pH correctors).

Verify with a manual meter that the equipment values ​​are correct.

pool water value test strips
pool water value test strips

Even if your pool is equipped with automatic dosing devices, they must be checked and calibrated regularly so that their reading matches the actual values ​​of the components present in the water.

That is, it will be necessary to regularly carry out a manual check of TAC, PH and Chlorine to ensure that the real values ​​coincide with the values ​​indicated by the automated equipment.


12th point in the Pool Liner Maintenance Guide

Tips for mechanical maintenance of the water of a liner pool

pool liner coating
pool liner coating

Notices on the mechanical maintenance of the water of a liner pool

  • NEVER THROW CHEMICALS DIRECTLY INTO THE GLASS, they are ALWAYS thrown into the skimmer.
  • Store the products in a place protected from the sun, ventilated and out of reach of children.
  • Do not mix products in the same container.
  • Frequently clean the waterline with specialized gel.
  • Check the pool water level.
  • CL and PH control (once a week during bathing season).
  • Clean the bottom and walls of the pool (once a week during swimming season).
  • Cleaning the glass (with a manual vacuum cleaner or a bottom cleaning robot).
  • Control of the water level three quarters of the skimmer window.
  • Filtration hours: Environmental temperature divided by two (8 hours are more common in the bathing season, programmed during hotter hours).
  • Do not throw metal and/or sharp objects into the glass.

13nd point in the Pool Liner Maintenance Guide

Reaction of our pool liner to contact with certain materials

pool metal stain
pool metal stain

Stains on our pool liner due to contact with unsuitable materials

  • There are certain materials which are especially harmful to the pool liner; they can cause stains and damage if they come into contact with our pool liner.
  • Direct contact of the pool liner with polystyrene, bitumen, tar, industrial oils and greases, paints or rubber should be avoided (some soles of shoes and boots, cables, pipes, etc.)

Incompatible materials for the CGT Alkor pool liner

pool liner coating
pool liner coating

Reaction of our pool liner to contact with certain materials

  •  Certain materials can cause stains and damage if they come into contact with our pool liner.
  •  Direct contact of the pool liner with polystyrene, bitumen, tar, industrial oils and greases, paints or rubber should be avoided (some soles of shoes and boots, cables, pipes, etc.)

Elements that should not come into direct contact with the reinforced pool sheet

rubber slippers
rubber slippers = not suitable pool reinforced sheet

The materials mentioned below must not come into direct contact with the sheet: polystyrene, bitumen, tar, paints or rubber (cables, irrigation pipes, some soles of shoes and boots, etc.)ç

14nd point in the Pool Liner Maintenance Guide

Preparing the pool for winter

prepare the liner pool for winter
prepare the liner pool for winter

How to prepare the liner pool for winter

  • Wintering the pool means protecting the reinforced pool sheet against: The pollution present in the air and the action of UVA rays.
  • Lower the water level below the skimmers.
  • Tightly close the suction and return nozzles, drains and other intakes.
  • Bleed all the pipes of the hydraulic circuit as well as the filter.
  • Place floats in the water to absorb the increase in pressure caused by the ice.
  • Since the filtration system is stopped and the water level has dropped, it is essential to cover the pool with a cover with UVA protection.
  • We suggest you consult our star product for winterizing the pool: winter cover
  • More information about: how to winterize a pool

15nd point in the Pool Liner Maintenance Guide

Precautions when cover the pool

High resistance PVC winter cover
High resistance PVC winter cover

Cautions when covering the pool with liner

  •  When using a pool cover, the water temperature can very quickly exceed the maximum level, above which the reinforced pool sheet suffers damage to its surface.
  • Furthermore, without the movement of water, the concentration of the chemicals present skyrockets and can reach very high levels, the effect of which would damage the assembled pool liner.

With the indoor pool, it is important:

  • Control the water temperature: must be below 32˚C.
  • Control the concentration of chlorine in the water: de 1 to 3 ppm (mg/l) for stabilized chlorine and 0.3 to 1.5 ppm for unstabilized chlorine.
  • Do not leave the water without recirculation for more than one hour to avoid stagnant water with heat or chemical buildup in certain areas (particularly around skimmers, sump, corners, etc.)

16th point in the Pool Liner Maintenance Guide

Maintain the liner with a safety factor

Pet pool safety.

Pet pool safety: tips to avoid and how to act against drowning

pool children safety

Pool regulations, rules and safety tips

Proactive attitude for liner pool safety

keep the liner
keep the liner

In any case, we are convinced that the most cautious attitudes when we want to avoid accidents in a swimming pool involve acquire basic safety elements necessary.

And at the same time, maintaining a proactive and cautious attitude regarding safety in the pool.

  • To start, prevent, reduce and try to neutralize all possible dangers as much as possible.
  • Although, below, we will give you the essential safety tips in the pool.
  • Secondly, make bathers aware that the attitude must be responsible and in accordance with good use.
  • Finally, it is essential to acquire the necessary elements according to the assessment of the use of the pool, type of bathers, location, etc.

Points to check for the safety of a private liner pool

  • Have at least one safety element and check its correct operation.
  • Ensure the correct use and effectiveness of pool products.
  • Monitoring the condition and cleanliness of the water.
  • Check pH and chlorine level.
  • Ensure that there are no risks of entrapment.
  • Avoid and minimize slipping risks
  • Check glass tightness characteristics.
  • Prevent drowning risks.
  • Make sure there is no corrosion.
  • Check the safety status in the construction and installation of the pool.
  • Stairs with steps with grade 3 non-slip flooring to facilitate entry and exit from the pool.

Basic rules to follow for safety in swimming pools

safe pool rules

Before starting to name the basic rules for pool safety, It is essential to emphasize that it will be essential to remember the preventive rules on a daily basis.

Above all, remind children of the regulations: do not run around the pool, avoid bathing alone, avoid bathing after eating, etc.

  • Have a first aid kit near the pool.
  • Access the terrace area with flip flops.
  • Protect yourself from the sun
  • Take into account the digestion time.
  • It is recommended that no one ever bathes alone
  • If the water is very cold, enter it little by little.
  • Appropriate behavior in the pool.
  • Don't jump headlong.
  • Have a phone nearby.
  • Pool filters must have a lid to prevent suction
  • It is advisable to have visible markings with the depth of the pool around you. 
  • Keep electrical appliances away from the pool

More protection in the pool for children

  • Continuous surveillance.
  • Children under twelve years of age must always be accompanied by an adult.
  • The installed security element must prevent the passage of children under 5 years of age.
  • Educate the child so that he knows how to behave in the pool.
  • Reinforce the child with swimming classes.
  • Check that the life jacket is appropriate for the child's size.
  • Use approved toys.
  • Once the bath is finished, toys should always be collected from the water so as not to attract the children's attention.
  • Play in the part where you can stand.
  • Avoid playing and running on curbs and near stairs.
  • Have basic knowledge to be able to cope with an accident in the pool.

There is a European Law that regulates the protection of all private swimming pools

  • Law No. 2003-9 of January 3, 2003.
  • 1st decree of the law: n°2003-1389 of December 31, 2003
  • 2nd decree of the law: n°2004-499 of June 7, 2004.
  • Furthermore, Spain does not require state legislation that regulates safety in swimming pools.
  • In our case, the obligation to regulate is borne by each autonomous community, adapting and establishing its own rules, as well as at a subordinate and specific level by the neighboring communities, if applicable.
  • There are also municipal ordinances regulating building works and activities.

More standardized pool safety elements:

  1. Safe pool liner as pool liner and non-slip with reinforced liner.
  2. Pool ladder for entering and exiting the pool
  3. Security coverage (for example: rigid cover, automatic blinds...).
  4. Pool fences / safety barriers
  5. Alarm systems (perimeter or immersion)..
  6. Floors for swimming pools.
  7. Pool lighting (if you use the pool at night).
  8. Pool shower.
  9. Type of pool disinfection.
  10. Pool safety nets.
  11. Safety bracelet.
  12. Safety bracelets with built-in sensors.

Correct maintenance of the pool liner safely

  • Use old clothes when cleaning since it is very likely that you will stain the clothes with the chemicals.
  • Be careful with the use of chemicals since they can cause serious health problems, such as: throat or skin, eye and lung irritation.
  • Routinely takes pool water samples and have them analyzed in a professional store to really control all the values.
  • Use the leaf collector often so that he can deposit the dirt on us.
  • Maintain pH and chlorine levels daily, if possible. are within their corresponding values,
  • Evaluate very well when to add chemicals to your pool since these can be contradictory and even cause water saturation.
  • Under no circumstances should liquids be mixed.
  • Products should always be brought to the pool through the skimmer basket.
  • More info in: Pool safety tips

17nd point in the Pool Liner Maintenance Guide

Optional measures for optimal maintenance of the liner pool water

1st Extra measure on how to clean the pool liner

Pool covers: protection against cleaning

indoor heated pool

All the  pool covers They protect against the fall of all types of dirt, leaves, waste, dust, insects... In addition, they facilitate pool maintenance and save on chemical products, since they prevent chlorine from evaporating and reduce cleaning tasks.

Use winter cover: Hibernate pool

All the  winter pool covers For their part, together with a good product for winterizing the pool, they avoid having to change the water and make it easier to tune up the pools.

Recommendation: pool hibernation

Likewise, in winter, it is highly recommended to hibernate the pool in order to keep the pool in its best condition.

  • Lower the water level below the skimmers.
  • Tightly close the suction and return nozzles, drains and other intakes.
  • Bleed all the pipes of the hydraulic circuit as well as the filter.
  • Place floats in the water to absorb the increase in pressure caused by the ice.
  • Since the filtration system is stopped and the water level has dropped, it is essential to cover the pool with a cover with UVA protection.
  • Right now, you can find more information about this product here: winter blanket for pool.

Pool thermal blanket

What is a pool bubble tarp?

Essential element in the pool: solar pool cover

The pool thermal blanket is a large plastic sheet (it is made of high-resistance PVC) of bubbles which floats on the top of the pool.

There is still a widespread belief that the bubble pool cover only has one purpose or function.: maintain the temperature of the pool water. Well, we will show you on this page that this is not the case, that is, The solar cover provides numerous benefits.

Advantages of having a thermal pool cover

  • 1st benefit solar pool blanket: more use of the pool A thermal pool blanket advances and lengthens your swimming season by several weeks and optimizes the time you use the pool much more!
  • 2nd benefit solar pool blanket: Savings. The pool thermal blanket stops evaporation, that is, it is equivalent to water savings, as well as energy savings for pool equipment (pump, filter...) and the same with chemical products. By reducing the use of the pool's electrical equipment thanks to the thermal pool blanket, they will have a longer useful life.
  • 3rd benefit solar pool blanket: less maintenance. As a result of the thermal pool blanket we will exponentially reduce the maintenance and cleaning of the pool.
  • 4th benefit solar pool blanket: Collaborates in safety. The thermal pool blanket also helps to minimize accidents both due to the visual factor, in the same way, it will help stop the fall of a pet or a child. Although if you are looking for a security cover we advise you a bar cover with a roller.
  • In case it is of interest to you, click to find out all the information about the pool thermal blanket.

2nd Extra measure on how to clean the pool liner

Outdoor pool shower: essential accessory

Importance of the outdoor pool shower in cleaning

The outdoor pool shower is a severely important accessory in a pool, especially considering hygienic issues and dirt absorbed by the pool water (sweat, creams ...). For this reason, it should be considered essential to shower before bathing.

In public pools it is mandatory to shower when entering and leaving the bathroom, so we would have to transfer this same habit in private pools.

The recommendation to shower before bathing is a hygienic matter for all bathers and for oneself.

Besides, it is also a point very important for pool maintenance and pool cleaning.

  • The outdoor pool shower It is an essential accessory for swimming pools to have and also provides an aesthetic and personal character in the garden, there are multiple models.
  • The energy from the sun heats the tank and therefore you can enjoy hot water.
  • In addition, the installation very easy without the need for electricity.
  • The solar outdoor pool shower is simply connected to a hose.
  • It should be noted that our body contains sweat, cream, conditioners, shampoos, lotions for hair or skin, etc., which if we do not shower go directly into the pool water and generate a chemical reaction that causes volatile organic compounds in the form of bubbles in the surface of the water named chloramine.
  • Chloramine causes serious health complications: respiratory problems, red eyes, irritated eyes, otitis, rhinitis, itchy skin, gastroenteritis….
  • In addition, when we shower, we also optimize the quality of the pool water and help the filtering system (pool purifier) ​​and disinfection (pool cleaning).
  • Simultaneously, we provide you with the link to the entry dedicated to the outdoor pool shower.

Importance of pool cleaning when leaving the pool

  • On the other hand, it is equally important to use the outdoor pool shower when leaving the pool.
  • Since it is totally essential to eliminate chlorine from our body, eliminate the chemical product from our body and eliminate the microorganisms that pool water contains and that can produce microbes. Likewise, it leaves the skin with a very rough texture.

Reinforced sheet maintenance manual for swimming pools

Download instructions for the maintenance of the reinforced sheet for swimming pools